Well I helped the cause by buying a Beretta Neos and a Walter MRS dot sight Wtth My rebate check.
The Neos is a Querky gun. They advertise that the gun can be striped with no tools, This is not true. It takes a dowel rod and a light hammer to loosen the take down nut. In the assembly instructions it states that the correct tension on the nut is 2 clicks past finger tight. That means that the dowel and hammer will have to be used to tightened it. I contacted Beretta and they confermed this.
If you are a left hand shooter this is not the gun for you. The magazine reliece is on yhe right side, directly above the trigger and is only accessable with the right hand.
The Walter sight crashed after 75 rounds and is on the way back for repair.
The sights on the gun are very good and shoot close to point of aim.
I fired 200 rounds through the gun with only 2 malfunctions both failure to eject, and I feel this was ammo related.
The biggest problem I had was the trigger would not consistantly re-engage the sear after firing a round, But this is a new gun and may need more break in time.
Will talk about acursacy later because I was not shooting up to snuff.
THE MIG