:: Bersa Talk ::

I just joined the site and I have a Firestorm .380 and it has about 600 rounds through it and a little spring broke in the handle rendering the gun useless right before a qualifying test for a training class I was taking. That's bad in of itself, but my main concern is will this happen again and keep it from going bang if I need it in a more ominous situation. Has anybody experienced this failure? I'm not feeling real good about the gun now and I'm thinking of dumping it.

I have the Bersa version and it happened to me.  The warranty center fixed it and I haven't had a problem since.  Go to the Tech Talk section and read the post at the top on how to ship it to Colorado Gun Works.  They'll get it up and running and it'll work great.

Bronson

---

"Each new generation born is in effect an invasion of civilization by little barbarians, who must be civilized before it is too late." T. Sowell
--------------------------
Thunder .380
Browning HiPower
Kahr CW40
Kel-Tec P32
Ruger MK I
Ruger GP100
S&W 60

Hey JD,

Same thing happened to me after about 450 rounds, and a couple others have reported it also.  My understanding is that the springs the factory uses aren't all that great.  Royce at CGW replaces these springs (under warranty, of course) with a more robust spring so it shouldn't happen again.  I got my .380 back at my front door in about a week, they do great work.

Welcome aboard !!  There's a ton of knowledge around here and more than enough goofiness too.

---

"He is no fool who gives what he cannot keep to gain what he cannot lose."

Thanks for your reply. I already took it to Gander Mountain as they are a listed warranty center. I talked to the gunsmith this evening and he said he would have to order a spring from Bersa. I wish I would have read your post before I took it there because is now appears I'm likely to get the same week spring put back in it. I guess I was a little impatient but it is my summer carry piece. Kind of hard to conceal a Ruger P944 during the summer.

Ahhh, I'm sorry I didn't warn you about Gander Mountain.  That's where I took mine and while they did get it fixed it took them a long time.  If I ever have need to have it fixed again I will send it to Colorado Gun Works as they will probably have the parts in stock and they seem to have a pretty fast turnaround time.

Bronson

---

"Each new generation born is in effect an invasion of civilization by little barbarians, who must be civilized before it is too late." T. Sowell
--------------------------
Thunder .380
Browning HiPower
Kahr CW40
Kel-Tec P32
Ruger MK I
Ruger GP100
S&W 60

Bronson:

If I ever have need to have it fixed again I will send it to Colorado Gun Works as they will probably have the parts in stock and they seem to have a pretty fast turnaround time.

Not to mention they fix it right!

---

Whining is for little girls, babies, mommy’s boys and girly men.
SNIVELING? Now that’s an art form!

FS22
BT380dlx; P3AT; PPK
Beretta 92FS; CX4 Storm
BT45 UC; FS 1911 DLX; Colt M1991A1; DW Bobtail
Taurus 38UL
CZ fnh Modell 27 WWII Luftwaffe issued to Hauptman Jaeduvel
+ old family guns

After 3 weeks of waiting, I got to the point that I was going to take my gun out of Gander Mountain and send it to CGW. The gunsmith just happened to find the spring on the desk and said he would have it done today. I went and picked it up and I got a bill for 29.95. I said, this should be under warranty. The gunsmith said we don't do warranty work for Bersa. I said that Bersa says you do. He was adamant they didn't do warranty work for Bersa and I was going to have to take it up with them. I then pointed to the sign that was behind him that said they an authorized repair center. He then reluctantly voided the invoice and gave me my gun. Needless to say, I think you know what my chances of buying a gun there or taking one there for repair.

There's someone that really knows his business!

RT

---

VERITAS AEQUITAS

Eagle Imports has a list of Gander Mountain Bersa Service centers. Here's a link: http://www.bersafirearmsusa.com/gander_list.php

So they are supposed to do service.

But I think you would be well advised to just send your gun to CGW. The contact information is at the top of the Tech Talk Forum page.

---

p-t-max

I'm no expert, I'm just, well---opinionated!

http://blog648.blogspot.com/

What an experience.  Glad you got it fixed and I'm curious...did you finish the class??? lol

Welcome to the forum

JimK

---

SA 1911 TRP, HK45c, Sig P220c
Sig P239 40cal.
S&W 640
HKP7M8, P7 psp, SA EMP
Sig P232, Bersa T, Colt Pony, Colt MKIV Gov, Ruger LCP
Colt Fronteer Scout 22lr/22mag, Walther PP 22lr, P22, Walther PPK 22lr, Ruger MKIII Hunter, S&W 34-1 22lr, S&'w 317 22lr